Best Insulation Contractors Navarre MN
With over 140 years of experience between our spray foam insulation contractors, our team dedicates our time in expertly providing energy and healthy indoor air quality solutions to preexisting residential and commercial clients in the Navarre, MN area by using the “Whole House as a System” approach to evaluate your home insulation needs and help save you money on your Navarre home energy bills with quality spray foam insulation.
Local Navarre Area Insulation Contractors
Navarre spray foam is available in two forms:
Open-cell spray foam insulation has tiny cells that are not completely closed and are less dense and filled with air. This gives the insulation a spongy texture and a lower R-value (although it can achieve a greater R-value if not restricted by space). Low-density, open-cell polyurethane foams are similar to conventional polyurethane foams but more flexible.
Closed-cell spray foam is much denser. It has a smaller, more compact cell structure and has a higher R-value per inch. It’s also ideal for achieving a high R-value in narrower spaces.
Energy Efficient Spray Foam InsulationDIY spray foam insulation kits are non-toxic and eco-friendly products that help to keep your home well insulated all year round. These are especially made using the polyurethane substance, which are extremely flexible and compact at the same time. Since DIY spray foam insulation kits are quite expensive, you really have to know how many you're going to use and where you plan to use these.You might not be aware of it, but your home is practically filled with so many crawl spaces and surface voids that these greatly contribute to your expensive energy bills. You could have saved more if you've discovered to use DIY spray foam insulation kits (e.g. Handi-Foam and Great Stuff) to keep your home warm and prevent pests from invading your personal space. Of course, you first need to know all the different places in your house that require proper insulation... if you're planning to do all the work, that is.You can start your do it yourself insulation project from any area in your house - you can choose to start from top to bottom or bottom to top. Let's say, you'll start at the bottom part, which is the basement. There are four main areas in your basement that could possibly let unconditioned air and pests enter your house: between your wall and interior foundation supports, at the bottom of the floor joist, air-conditioning fixtures (HVAC), and main electrical box panel. You can locate the voids or cracks by investigating the area where it enters your wall into your house or by removing pre-existing insulation materials. Since some spray insulation foams have long nozzles, they can easily seal all these areas and with little mess as possible (make sure that electrical wirings are properly covered or protected before spraying to prevent the risk of electrocution).Living rooms and kitchen areas are also not excused from wall gaps or cracks. The electrical switch outlets and exposed sink plumbing systems are the possible entry point of drafts. Make sure to seal all the areas around the pipe plumbing and electrical outlet frame (don't spray inside the box!).Normally, the attic is specifically built to keep the temperature inside well regulated. The only flaw to the design is its door hatch design structure, which allows circulation of conditioned air in and out of the attic. What you need to do is to spray enough foam insulation all around the space gaps between the hatch door and the brace frames.In planning to insulate your home, it is not enough that you research on what products you should use. It is also important that you know where and how you're going to use the DIY spray foam insulation kits to prevent any types of wasting. So, make sure that you do the proper planning and budgeting to maximize your energy savings.
Most homes are not insulated properly and any heat that escapes has to be paid for. Therefore, you should fully insulate your home to maximize energy efficiency and minimize your energy bills.
You probably didn't realise that round 50 per cent of heat loss in a typical home is through the walls and loft. The energy companies know this only too well but of course it's not in their interest to tell you. They would rather see you spending your hard earned money paying to heat your poorly insulated house. The more heat that escapes from your home the more you spend on heating the great outdoors and the more money your energy supplier will make from you.
Therefore, it is definitely worth checking whether your home is properly insulated otherwise you are wasting lots of money on heating fresh air. Upgrade your insulation and you will make big savings on your energy bills.
The following are just some areas where you can improve your home insulation to save energy and money:
1. Loft Insulation
Without loft insulation you could be losing as much as 25 per cent of your heating costs through your roof. Your money is literally disappearing into thin air. Insulating your loft is a simple and effective way to reduce your heating bills, which you can even do yourself. Estimated annual savings of $300 - $400.
2. Draught proofing
In a typical home 20 per cent of all heat loss is through poor ventilation and draughts. Huge savings can be made by adopting a few simple draught proofing measures in your homes.
Estimated annual savings of $50 - $100.
3. Double Glazing
Double glazing cuts heat lost through windows by around half. Modernize your windows by replacing all your ordinary windows with argon filled, double-glazed windows to save around 2.5 tonnes of carbon dioxide (CO2) per year for homes with gas heat, 4 tonnes for oil heat, and 10 tonnes for electric heat.
Estimated annual savings of $250 - $400.
4. Cavity wall insulation
Around a third of all the heat lost in an un-insulated home is lost through the walls. Cavity wall insulation is a fantastic way to significantly reduce the amount of energy you need to heat your home.
Estimated annual savings of $250 - $350.
5. Floor Insulation
As we all know waking up in the morning can be difficult enough without having to endure the shock of an icy cold floor prickling at your toes. This problem is due to a lack of suitable floor insulation or gaps and draughts around skirting boards, which together can account for around 15 per cent of heat loss from your home. Both are simple to fix and here's how. Timber floors can be insulated by lifting the floorboards and laying mineral wool insulation (e.g. glass fibre quilt) supported by netting between the joists. Afterwards you should also fill all gaps between the skirting boards and the floor with sealant to block any remaining draughts. Estimated annual savings of $150 - $200.
There are many other areas in your home where you can improve insulation and save energy and money. Individually or in combination by using these techniques you will benefit with immediate reductions to your energy bills. Over the longer term your savings will run into thousands so now is the time to act particularly as global energy prices continue to rise.Spray foam insulation is often considered to be the best type of insulation over many of the other choices available out there. When compared to fibreglass insulation, for instance, it is said to offer maximum moisture and air protection, along with many other different benefits that leave the rest behind in various areas concerning your home or that of a structure.Several studies taken have shown that around 40% of a structures energy may be lost due to poor air insulation. Insulation like fibreglass often is stabled into place or bears gaps along the edges when stuck against walls or within crevices, allowing for ample enough room for air to pass through quite easily, making the insulation less than efficient.Spray insulating allows for maximum results in preventing air infiltration problems, which in turn can save on energy costs. This is helped by the fact that foam insulating has a high R-value, ensuring high-quality insulating. Since the material adheres to surface, providing a tight seal and insulation, it can increase the chances for a more controlled temperature environment.Due to the high quality air barrier that sprayed foam insulating offers, it also contributes to the protection and reduction of moisture infiltration and damage. Excessive amounts of moisture can create harmful problems with mildew and mould, which in turn can cause a number of risky health factors within your home. One main cause for these issues is due to poor moisture protection, which can allow for damp mould-inducing conditions if one is not careful.Unfortunately, there is no true way to prevent the problems of mould However, one can better protect themselves and their home or building by ensuring stable sealing and barrier protection with spray insulation, which can reduce many causing factors and the overall risk that such mould problems will occur to begin with.Another benefit of foam insulating is that it helps with both structure strengthening and overall soundproofing. Due to the monolithic and seamless stability that it offers, it adds strength to walls and so forth. It also adds the tightening of acoustics within an environment, helping to reduce the sound of travel, adding a bit of privacy on a room-to-room basis.Spray foam insulation can offer many benefits overall, touching upon several areas within the home, leaving much of the competition behind. This type of insulation can help fight against pollen and dust, deaden sound, has a permanent lifespan, protects from moisture and air infiltration with superior insulation, reduces energy costs, and even adds strength and stability to a structure.
What Is Spray Foam Insulation and Where Can You Use It?Thinking about taking on a green building project? If you want to build an eco-friendly building or home, take advantage of the new technology and product advancements available, that can help you conserve energy while helping the planet. Spray foam insulation is one important innovation that has numerous practical and environmental benefits.The initial price of applying spray foam will be more expensive when compared to the traditional fiberglass alternative. Due to the nature of the product, it can only be applied by professionals, driving up the costs; however, eventually a foam insulation system will not only pay for itself, but you can even profit from it.Spray foam insulation is liquid polyurethane that forms into a solid, foam-like substance once it hits a solid surface. The liquid state allows it to penetrate fine cracks and holes in the surface that products like fiberglass can't protect. Since the entire surface area is sealed, it is much more energy efficient than any other material available.It keeps more warm air in during cold months, and keeps it out when it becomes hot. Your electric bill will reduce, saving you money and helping the environment. Buildings with spray foam insulation also sell at higher prices, adding value to your property.The thick barrier that polyurethane foam creates also helps prevent sound from travelling. You won't have to worry about noisy neighbors, or disrupting anyone if you have guests over. Since it's versatile and can be sprayed on nearly any surface, you can even use it to insulate floors and ceilings. You won't have to worry about your guitar practice in the basement upsetting anyone nearby.Spray foam insulation also discourages pests from burrowing into your home. The insulation is difficult to tear through, and it can be sprayed along cracks and openings to ensure that no uninvited guests attempt to slip inside of your home. You'll no longer have to fumigate with dangerous pesticides. It can also help keep moisture out, and is excellent for preventing mold and water damage.In comparison to fiberglass, polyurethane is a far safer and more eco-friendly building product. Fiberglass is less energy efficient, often comes loose, needs to be replaced much sooner, and can be physically harmful. Fiberglass can cause redness and itchiness if touches bare skin.The small fibers can also break off (which is common). As these wiry, sharp wires float in the air, they can be accidentally and unknowingly inhaled. Their sharp ends can cut the inside of the esophagus, creating scars that are thought to be a potential cause of cancer. It is often colored bright pink and, because of its unusual texture can entice children play with it, or even put it in their mouths.On the other hand, spray foam insulation stays put. It won't fall off or disintegrate, and it's made of safe materials. You won't have to worry about dangerous particles floating through the air. It is also made from renewable and recyclable resources. Spray foam insulation not only saves energy, is more hygienic, and health friendly, but purchasing it contributes back to the economy.
Spray Foam Insulation Minnesota. This high performance Spray Foam Insulation and climate isolator also enables you to build stronger structures. Because of its ability to fully adhere to the structure, forming a solid bun between studs, the building becomes extremely stiff and strong. The concept is much like completely gluing every piece of the house or building frame together. Providing up to a 150% improvement in the racking strength of your walls!! When choosing your Spray Foam Insulation Contractor in the Minneapolis area please give us a call for all of your Spray Foam Insulation needs.
Flexible insulation is the most widely used insulation in residential housing. This soft flexible material is made from fiberglass, and is commonly used in floors, walls, ceilings, and roofs. It can be purchased by the roll and cut to length for stud cavities, or rolled out to length in attics. Batts can also be purchased and are pre-cut for easy handling when insulating ceilings or crawl spaces. Both styles are made to fit traditional 16 or 24 inch framing, and can be purchased with or without a vapor barrier. Flexible insulation is effective in all types of climates and is easy to install. There is a risk of exposure to glass fibers when installing flexible insulation, so protecting yourself with gloves, long sleeves, and a dust mask is recommended.
Rigid Foam Board Panels
Foam boards are rigid panels that are widely used for insulating foundation walls or under concrete slabs. Panels can also be applied over exterior wall sheathing when installing new siding to increase the r-value of the wall. On cathedral style ceilings, panels can be installed below the sheathing on a roof. Foam board insulation comes in rigid panels 2 to 4 feet wide, and 8 feet in length. These rigid panels are an ideal insulator and add rigidity to the structure. They are made from polystyrene and polyurethane materials, and can be used in any type of climate.
This form of insulation is an ideal type to use when insulating areas which are difficult to reach. It's an effective insulator to use in truss cavities or in areas containing pipes, wires, or duct work. Loose fill can be purchased in bags and poured into the cavities, or it can be blown-in professionally using pneumatic equipment. Blown-in is a popular method used to insulate older homes without the worry of removing any interior finished wall surfaces. Loose fill insulation is made from fiberglass or cellulose, and is efficient in all climates. Because it has a fiberglass component, personal protection should be worn to prevent exposure to the glass fibers.
Foam products come in two forms, foamed-in-place or spray cans. The Foamed-in-place product is sprayed into framing cavities of a structure by professionals using specialized equipment. This expands and then hardens to form both an air tight seal and add stability to the structure. Small spray cans be purchased by a homeowner to seal small cracks, or insulate around windows and doors to eliminate heat loss.
Home Insulation With Spray Foam - Environmentally Friendly Options for Green InsulationNow that everybody wants to build green, there are lots of new insulation options for keeping your house warm. These include spray foam and fiber insulation and non-fiberglass batts. You no longer have to use materials that are potentially dangerous to yourself or the environment. All of these options use recycled materials in an environmentally friendly way. Let's take a look at some of these options.- Non-fiberglass Batts use a variety of earth-friendly materials with cotton for natural insulation. Most folks use recycled sheep's wool that is treated so that it is fire resistant. Another material you can use is rock wool, which is naturally resistant to fire, water and noise.The other materials used are cotton batts, wool batts, rock or slag wool batts and boards, or any combination of these. It depends on what you want out of your insulating material. If noise reduction is a major concern, you should go with rock wool, which has a natural resistance to noise.Installation technique is exactly the same that has been used for many years for installing fiberglass materials. The advantage to using non-fiberglass batts is that they are friendly to the environment.- Spray foam insulation is quickly becoming the most popular methods, and this is because it is not only green, but also flexible and relatively easy to install. If you're willing to put a little elbow grease into it, you can do the entire job yourself, and there are kits available for doing just that.You simply spray the foam insulation into the cavities of the wall and the material expands by itself to fill the space up completely. The foam is particularly effective because it fills all the little cracks and crevices completely. Most types of spray foam are fire resistant, and are also effective against moisture that can creep into your house and cause mold infestations.In some cases, spray foam insulation is used along with other techniques to get the desired result. Because of the foam's flexibility, you can use it together with non-fiberglass batts. While some people can handle their spray foam installation themselves, if you're not much of a handyman/woman, you might want to have a professional do it for you.- Spray fiber insulation is where little bits of various materials are blown into your wall cavities to create insulation. The materials are environmentally friendly, and often include mineral wool, cellulose and other materials mixed with water. It is blown into the wall crevices using a special machine designed to pack it in so that there is no air left. The material dries and a special adhesive that is mixed in keeps it all in place.The Spray fiber product is also a popular method because it is, by far, the easiest. Water should be mixed into the solution depending on how humid the environment is. The material is sprayed in, and in 24 hours it dries into place. Best of all, all the materials used are recyclable.Home insulation has never been this easy or easy on the environment before! Join millions of others who are doing their duty to save the earth by building green.
Home insulation is important for houses in this age of high energy cost. Home insulation helps to reduce the cost of utility bill in terms of low energy usage. Moreover, it also boosts the values and livability of houses. Therefore, home insulation is especially a must for houses that are more than 10 to 15 years old which tend to be not insulated when they were built 10 to 20 years ago. Even if they were insulated at that time of construction, the insulation technology or the material might not be as good as today's technology. Therefore, it's better for you to replace or remodel the insulation if they were installed a decade ago.
The first step to installing home insulation is to identify areas of the house that need to be insulated. The general guideline here is to look at places where there is contact or leak between the interior of your house and the outside world. A good example of this scenario will be the window. During the winter, when you open the window, you can feel the cold air from outside tends to rush into the house. It's the same in the summer where the heat will enter the house once the window is open. When this situation happens, heat loss or heat gain is occurring.
One thing to remember is that heat exchange is not restricted to just the window and the door. It also happens at places that are intact such as the wall, ceiling and the roof. Even though the wall, ceiling and the roof is a poor conductor, heat loss and heat gain will still occur. If there is a crack in the wall or a hole in the ceiling, heat loss or gain will be accelerated at a faster rate. Therefore, we need insulation to reduce or better eliminate completely the rate of heat loss and gain. With that being said, areas such as the walls, ceiling, basement, attic and the roofs are the critical areas that require to be insulated.
Once you have determined the insulation areas, next step is to choose the insulation material and types of insulation. Some common insulation materials that are affordable to most households are fiberglass, wool, paper, wood and cotton. The more expensive material is the popular polyurethane that is used in spray foam insulation. The polyurethane can cost up to several times more than the conventional materials such as fiberglass, wool and cotton. New and non-conventional insulation materials are being developed constantly in the market.
The good things about these newly developed insulation materials are most of them are made from recycle materials and are absolutely environmental friendly. With the advance of technology, scientists are constantly developing materials that are non toxic, water resistance and fire proof. One good example of a sophisticated insulation material is the one developed by Warmcel which is made of 100% recycled newspaper. Another one is the glass wool developed by Earthwool which is made of recycled glass and sand. One good example of non-conventional and environment friendly spray foam which is made from recycled plastic materials and renewable soy oils is developed by Heatlok Soy.
To recap on the importance of home insulation, houses that were not constructed with insulation installed are encouraged to be reviewed by contractors or better yet perform a home energy audit to check on the amount of energy that can be saved with insulation installed. Insulation not only preserves the limited non-renewable resource with the use of more environment friendly and recycled materials, it also boosts the sale value of the houses and makes the occupants comfortable.