Local Insulation Companies in Waite Park Minnesota

Best Insulation Companies Waite Park MN

Roof Insulation Contractors

With over 140 years of experience between our spray foam insulation contractors, our team dedicates our time in expertly providing energy and healthy indoor air quality solutions to preexisting residential and commercial clients in the Waite Park, MN area by using the “Whole House as a System” approach to evaluate your home insulation needs and help save you money on your Waite Park home energy bills with quality spray foam insulation.

Local Waite Park Area Insulation Companies

House Insulation Companies

If you’re in the Twin Cities MN area, look to our experienced Waite Park Minnesota company! We have nearly 35 years of experience installing spray foam from leading manufacturers.

Waite Park spray foam is available in two forms:

Open-cell spray foam insulation has tiny cells that are not completely closed and are less dense and filled with air. This gives the insulation a spongy texture and a lower R-value (although it can achieve a greater R-value if not restricted by space). Low-density, open-cell polyurethane foams are similar to conventional polyurethane foams but more flexible.

Home Insulation Companies

Closed-cell spray foam is much denser. It has a smaller, more compact cell structure and has a higher R-value per inch. It’s also ideal for achieving a high R-value in narrower spaces.

Roof Insulation Companies

Spray Foam Insulation - How This Type of Insulation Could Render All Other Types Obsolete

Foam Insulation Mn Spray foam insulation is a form of spray plastic that can be used as insulation and an air-sealing barrier on roofs, corners, walls and contoured surfaces. It's made by mixing different liquid components that react and quickly form the resulting foam.Types of Spray Foam InsulationThere are two main types; open cell and closed cell (this can also be broken down and classified as low, medium and high-density foam insulation). The less expensive open cell insulation uses fewer chemicals and can be a very effective air barrier, but does not act as a water vapor barrier. Typically it is used for indoor insulation, and can also be a great sound barrier.Closed cell foam insulation has a more dense and compact structure, and can also be used a water vapor barrier. Due to its structure, it can be used both indoors and outdoors (including roofs).Benefits There are many benefits to using this type of insulation in your home or commercial building, but here are a few: First and foremost, in can lower your utility bills. This is because it stops air and moisture infiltration. Studies have shown that without proper insulation, a home can lose up to 40 percent of its total energy due to air infiltration. It adds additional strength to the structure of the building. It can help keep dust and pollen out It's permanent and requires no additional maintenance How Does It Work?Actually, applying this type of insulation is quicker and easier than you may think. As the liquid is sprayed, it quickly transforms into hard, thick foam. It can be used anywhere, however, because of its flammability, it requires an ignition source if installed near a flame source (such as a water tank or furnace).Should You DIY Spray Foam Insulation?There are plenty of DIY foam insulation kits you can purchase, and even more online tutorials that show you how to do the job. However, if you don't have experience working on these types of projects, it's best to go the "better safe than sorry" route, and it is really a job best left to the professionals. It's important for individuals who want to have this type of insulation installed in their homes to contact a professional, as additional gear is required to handle the materials.Spray Foam Insulation vs. Fiberglass & CelluloseWhile it may at first seem tempting to go with a more traditional fiberglass, there are many cons to this option. It's important to understand all aspects of your options so that you can make an educated decision. Fiberglass still allows air to pass through, defeating the purpose of its installation in the first place Because they are made of a combination of old materials, they may not meet changing building codes in your area. While spray foam insulation stays in place and is permanent, fiberglass and cellulose can sag over time, diminishing its overall performance. Traditional insulation can still soak up water, which can lead to mold growth and costly repairs-or worse, the loss of your home. Fiberglass and cellulose can tend to be on the dusty side, paving the way for pollutants to potentially enter the home and trigger allergies. Unlike spray foam insulation, fiberglass can be intruded by pests, and even used as a nesting ground. Spray foam insulation is a smart choice for new builds and retro fits. It is cost effective, safe, and provides excellent insulation properties. With all of the insulation choices on the market today, this type of insulation offers many benefits to today's homeowner. Energy Home Insulation

Home insulation is one of the contemporary and widespread home improvement techniques in the UK. Adding insulation measures has resulted into curtailing energy and money on energy bills. So what are you waiting for? Insulate the portion of your home squeezing out heat produced in your house. It can be the:

1. Walls of your house that give off 35% of the heat
2. 25% of the heat to escape through roof
3. 25% of the heat to emit from doors and windows

As the temperature drops in the winter months, the heated air goes up. You have to warm it up using heater and consuming energy only to increase your energy bills. Insulating your house means you are adding a layer of heat resistant materials to the areas that send off heat through small openings or holes. Three main types of home insulation processes are --

1. Cavity wall -- The external walls of your house with gaps in between two thin brick walls are targeted to give cavity wall insulation treatment. Small holes are drilled into the external walls to inject insulation materials. This is called blown in home insulation. Blown in home insulation is advised to be done by professional contractors to ensure 100% effectiveness of the insulation. Wall insulation can save about 120 pound on yearly fuel bills plus 800kg of CO2. Insulating solid walls saves even more - 2.6 tonnes of Co2 and 380 pounds on fuel bills.

2. Loft -- Thick insulation materials at least 270mm as per government recommendations are laid in the attic area of the house in loft insulation process. Loft insulation can be done in DIY method except those areas which are difficult to access by a layman. This home insulation completed by following recommended depth can slash energy bills up to 205 pounds a year and 1 tonnes of carbon dioxide.

3. Draught proofing -- Tiny cracks and small gaps around doors and windows can be spacious enough to send off 20% of the heat from the house. Therefore, sealing those draughts to absorb cold air inside will help your building retail the heat air inside. Areas targeted for this home insulation process includes keyholes, gaps around floorboards, small openings around doors and windows.

Amongst these three home insulation processes draught proofing is the cheapest and easiest to install as materials are easily available from DIY stores and insulation process can be completed by users themselves.

Roof Insulation Contractors The spray foam insulation kits are your expandable green solution to effectively insulate your home. Its specific formula creates an envelope that you can spray anywhere in your house that needs insulation such as the walls and ceilings. By far, expanding insulation kits are the best and most effective DIY product out there.Most foam insulation (also known as polyurethane foam) comes with a special spraying device, such as in the Handi-Foam E-84 spray foams, that precisely distributes the formula to seal big cracks and holes. As a result, it helps keep the temperature cool during the summer and warms it up when it's cold outside. When the application is done, the drying process would expand and harden the spray foam making it virtually impossible to remove. That's the reason why you should always wear protective clothes to prevent it from directly sticking to your body.You need to know that these are not cheap (and it would get more expensive if you don't know what or how many you're going to use). Unless you use the proper protective clothing, you can always expect that the process is going to be messy. And too much spray insulation foam on an area could lead to its possible collapse because of rapid and increased expansion.Despite all of that, you are better off with spray foam insulation than fiberglass insulation. The good thing about spray foam insulation is that they can fill even the tiniest gaps and prevent pests from entering your home (you can cross out that pest control bill from your list). Not only is it environmentally friendly, it's also good for your health because it reduces the possibility of inhaling harmful substances.Now, if you really want to save money, you need to follow some simple guidelines so that you'll get the right spray foam insulation kits at the first time.The first thing to do on your list is to take your square footage. When we talk about square footage, it means that you'll only measure the area where you intend to use the spray foam insulation kits.Dirt, scrap materials, and oil - all of these should be swept and scrubbed away before applying your spray foam insulation. Since this adhesive product doesn't stick on oily surfaces, you'll be wasting a great amount of money by forgetting to do this important step.Next, you need to decide on the thickness of the application. Most experts would recommend that you spray 1 inch to 2 inches at a time and a maximum of 3 inches.After deriving the total amount of boards required (square footage multiplied by number of inches), you finally have to calculate the number of kits you require.There are many effective products out there that you can find, such as Dow Great Stuff Insulating Foam Sealant, which you can find at Lowes.com. In the end, what makes spray foam insulation kits great is because these are eco-friendly and energy-efficient products.

The Best Do it Yourself Spray Foam Insulation Kit - How Can I Buy the Right One?

Siding Contractors Rochester Mn What is Spray Foam Insulation?: It's a form of insulation, which is sprayed over an area you wish to insulate, instead of the conventional way of placing some sort of insulation in the wall cavity. When it is sprayed it rapidly expands and fills in every single void it can, creating an almost perfectly sealed space.What are the advantages of using Spray Foam Insulation?:By expanding and filling ever crack and void it provides complete sealing, preventing air from leaking, which is still in effect with other insulations. It can be placed in any area without having to remove existing tubing, electrical wires or pipes of any kind. It is water repellent and allows moisture to leave from the walls. Mold cannot grow on it. It also prevents the development of mold, which is due to humid air. It is an effective way of reducing outside noises. Also, Spray Foam Insulation has a low flammability. It can be used as an effective way of insulating your boat. It can be used in small areas.How well does it work?: Something of the sort like icynene has an R-value of 3.6, Polyisocyanurate has an R-value of 5.6 although it can range up to 7, while Polyurethane ranges from 5.8-6.8. The R-value is defined as "a measure of a substance's insulating value or resistance to heat flow. The higher the R-value, the greater the insulating ability." (Jacksonemc EMC). Although the R-value may be lower then other materials, you must remember that it is a sealant that prevents the escape of air, which is a huge contributor to heat loss.What is the cost and savings?: The initial cost of using spray foam insulation is around 3 times more then conventional insulation, however the savings offset the costs by far. It can cost 1.25- 2.25$ per Sqft. The savings repay the initial costs by around 3-5 years, depending on the amount of insulation used. It pays off, and you will notice a difference when the insulation is put it. You will feel warmer, you will save money, you will help save the environment and you will admire yourself for making the right decision.Is it environmentally friendly?:Many organizations have rated spray foam insulation as one of the greenest methods of insulation with the most attention going to icynene. Most spray foam insulations do not contain HCFC's, CFC's or formaldehyde. They are relatively safe for individuals with respiratory problems such as asthma. So the answer to the question is yes it is environmentally friendly. Insulation Specialist

Most homes are not insulated properly and any heat that escapes has to be paid for. Therefore, you should fully insulate your home to maximize energy efficiency and minimize your energy bills.

You probably didn't realise that round 50 per cent of heat loss in a typical home is through the walls and loft. The energy companies know this only too well but of course it's not in their interest to tell you. They would rather see you spending your hard earned money paying to heat your poorly insulated house. The more heat that escapes from your home the more you spend on heating the great outdoors and the more money your energy supplier will make from you.

Therefore, it is definitely worth checking whether your home is properly insulated otherwise you are wasting lots of money on heating fresh air. Upgrade your insulation and you will make big savings on your energy bills.

The following are just some areas where you can improve your home insulation to save energy and money:

1. Loft Insulation

Without loft insulation you could be losing as much as 25 per cent of your heating costs through your roof. Your money is literally disappearing into thin air. Insulating your loft is a simple and effective way to reduce your heating bills, which you can even do yourself. Estimated annual savings of $300 - $400.

2. Draught proofing

In a typical home 20 per cent of all heat loss is through poor ventilation and draughts. Huge savings can be made by adopting a few simple draught proofing measures in your homes.
Estimated annual savings of $50 - $100.

3. Double Glazing

Double glazing cuts heat lost through windows by around half. Modernize your windows by replacing all your ordinary windows with argon filled, double-glazed windows to save around 2.5 tonnes of carbon dioxide (CO2) per year for homes with gas heat, 4 tonnes for oil heat, and 10 tonnes for electric heat.
Estimated annual savings of $250 - $400.

4. Cavity wall insulation

Around a third of all the heat lost in an un-insulated home is lost through the walls. Cavity wall insulation is a fantastic way to significantly reduce the amount of energy you need to heat your home.
Estimated annual savings of $250 - $350.

5. Floor Insulation

As we all know waking up in the morning can be difficult enough without having to endure the shock of an icy cold floor prickling at your toes. This problem is due to a lack of suitable floor insulation or gaps and draughts around skirting boards, which together can account for around 15 per cent of heat loss from your home. Both are simple to fix and here's how. Timber floors can be insulated by lifting the floorboards and laying mineral wool insulation (e.g. glass fibre quilt) supported by netting between the joists. Afterwards you should also fill all gaps between the skirting boards and the floor with sealant to block any remaining draughts. Estimated annual savings of $150 - $200.

There are many other areas in your home where you can improve insulation and save energy and money. Individually or in combination by using these techniques you will benefit with immediate reductions to your energy bills. Over the longer term your savings will run into thousands so now is the time to act particularly as global energy prices continue to rise.

Minneapolis Insulation Contractors One of the most important keys to reducing your heating and cooling costs is having your home well-insulated. So what is the best insulation for your home?Spray FoamFoam insulation has two forms: Open and closed cell. Both are made from a polyurethane material and have different propellant agents added. Some are made from biodegradable materials, such as soybeans, to make the off-gases friendlier to the environment. Foam is probably the best insulation for blocking air infiltration combined with high R-value. Installed by a professional, the price of spray foam varies depending on the thickness of the walls and type of foam. Spray foam insulation is probably the best overall insulation on the market if you can afford the cost. Foam insulation lowers your heating and your cooling loads when installed correctly. Additional benefits are elimination of air infiltration, keeps out dust, mold and allergens, and does not sag or deteriorate.Open cell foam is used more in residential applications. It is less expensive to install and is easier to work with after it's in place. Open cell allows water to penetrate, so it makes an excellent roof deck insulator. If water is allowed to penetrate, you can locate roof leaks before the decking deteriorates. Biggest benefit of open cell is heat transfer in sunny locations. It takes approximately 36 hours of sun to penetrate through 8 inches of foam. This is also true for walls. So when the home is cooled, it will stay cool. The warranty of the roof material is not voided with the installation of spray foam insulation.Closed cell foam has a much more structural component to it and can support some weight without compression. Closed cell does not allow water to penetrate and is an excellent insulator for basement and crawl walls where water could be a problem. Closed cell foam has a higher R-value per inch but is very ridged and tough to work with after installation. It is most often used in commercial applications. However, it has its useful applications in homes.Foam insulation keeps mold out of walls. Mold occurs in walls with batt insulation because of "thermal loop effect". This is where the heat penetrates the exterior wall, coming in contact with the cooler interior surface of the drywall, causing moisture to form. Moisture above 25% can provide an environment for mold to grow. Spray foam blocks this heat transfer and has no air gaps in which moisture can form.One way to combat the higher cost of spray foam is to combine a couple of inches of closed cell foam with fiberglass batt insulation installed over the foam, getting the exceptional air-blocking value of foam, with the high R-value and lower cost of fiberglass insulation. Spray foam insulation costs more than fiberglass batts, but it also has approximately twice the R-value of typical fiberglass batts insulation. By combining the two you will get the best of both. Foam insulation is also particularly good for remodeling projects when there is only easy access to the basement or crawl space and the attic. By blocking the air flow from the top (attic) and bottom (crawl or basement) you stop the draftiness that some older homes have, thus making the home more comfortable.A more comfortable home is what we all are looking to achieve. Spray foam can give you warmth in the winter and cooling in the summer when combined with the appropriate HVAC system. These systems can be smaller in size when your home is better insulated with less air infiltration.

Icynene Insulation

Home Insulation Companies If you are in your home when the wind is blowing outside and feel a draft, it may be time to think about insulating your house. Sometimes drafts are hard to nail down. Maybe you check around and can't decide if its coming form under the door, from the electrical outlet or around the window. Before the wind gets cold in the winter, consider do it yourself spray foam insulation kits.Spray foam kits are a great idea for use around windows and doors. The foam comes in an aerosol type can with a unique spray nozzle that has an extension of four to six inches. This extension lets the foam be very targeted and get into really small crevices and cracks to get maximum coverage. The foam expands immediately upon contact with the air.But there are some things about the spray foam kits you should know: 1. Know exactly where you want to put the foam before you pull the trigger on the nozzle. Make sure you shake the can and then put the extension exactly where you want to put the foam. It expands very quickly and it is extremely hard to remove if you don't get it in the right place the first time. It is very sticky until it dries. 2. There's not very much in the can. If you a doing a small window with a minor problem, figure on one can. Even a small window may take 3-4 cans if there are lots of gaps that need to be filled. 3. It's not cheap. Each can runs between $3.00-$4.50. That works for a small area, but if you are going through 3-4 cans or more per window, you may want consider a different course of action. Minnesota Insulation Polyurethane foam (PUR foam) had been widely used in most household and building installations. There are two types of polyurethane depending on how it is applied, the rigid form and the spray foam. Spray foam application is usually cheaper though less effective.Polyurethane foam is an insulation material with high thermal resistance because of the low-conductivity gas present. It is available in liquid formed but is applied using a spray equipment. HCFC or hydro chlorofluorocarbons are the usual gas used with an R-value range of R-7 to R-8 per inch. This R-value deteriorates in time through the process called thermal drift. As the low conductivity gas escapes through the air, gas molecules present in air replaces the gases in the insulation. This phenomenon usually starts after 2 years of installation.While the rigid board structure is more effective in insulating, application of spray polyurethane foam insulation relatively is easy since it molds to the form of the surface. Because of that it is also called, foamed-in-application. Most of the spray foam produce today has non-CFC (non-chlorofluorocarbon) gas as their foaming agent. While these non-CFC foams are less effective in insulation, they pose less threat to the ozone layer. It is also effective in a relative large range of temperature. An R-value of R-6 to R-6.5 per inch is normal for high density closed-cell PUR foam, about 32 kilograms per cubic meter (kg/m3). Low density open-cell PUR foam has about 8 kilogram per cubic meter (kg/m3). This has been noted to be more flexible than the regular polyurethane foams. Carbon dioxide as also been used as a forming agent for some low density foams.Spraying the polyurethane foam requires specific equipment and personnel using them must be properly trained. High density foams have usually slow-expanding capabilities. Low density foams expand rapidly when applied to walls' cavity sealing them almost instantly. However may cause over-expansion in the walls' surfaces creating damage.Using spray polyurethane foams in home insulation benefits the owner in many ways. Non-CFC foams are eco-friendly have no formaldehydes that may damage the ozone layer in the atmosphere. It can greatly eliminate air or wind infiltration the household. Air seeping through cracks or opening in the walls or roofing can increase convective air currents in attics or walls and also increase moisture and condensation rate inside the household. Since it is a very effective insulation, less energy can be used in terms of cooling and heating the household, while maintain the preferred comfort zone inside the house. It also passively strengthens the walls they are applied to. It has also long life span of more than 10 years which can be extended further by recoating.Installing or using spray polyurethane foam insulation, however must depend and customize to fit the home's building lay-out, cost of effectiveness, and even the climate wherein the home stands. While these considerations can be easily dealt with especially for someone with high budget, application of spray foam polyurethane, for best results must be left at the hands of experts.

Minnesota Insulation Companies